LCD DISPLAY: The liquid crystal display is the main readout for the operator and programmer of the test settings and test results.
RESET SWITCH: This is a momentary contact switch. To reset the system for the next test, press and release the red Reset switch. This switch may also be used to abort a Test in Progress.
TEST SWITCH: This is a momentary contact switch. Press the green switch to turn on the high current output when in the test mode.
POWER SWITCH: Rocker-style switch with international ON ( | ) and OFF (0) markings.
SET KEY: Use this key to advance forward through the setup menus.
DOWN ARROW (∨): Use this key to decrement numeric values in the setup mode. This key also used to toggle ON/OFF functions.
UP ARROW (∧): Use this key to increment numeric values in the setup mode. This key also used to toggle ON/OFF functions.
EXIT KEY: Use this key when you desire to enter the Run Mode to initiate a test. This key may also be used to save settings into memory.
TEST LED INDICATOR: This red LED lights to indicate to the operator that a test is in process.
CURRENT OUTPUT JACK: For the connection of the detachable 6-foot red high current test lead or adapter box. This jack is always used when performing a Ground Bond test.
RETURN OUTPUT JACK: For the connection of the detachable 6-foot black return test lead. This jack is always used when performing a test.
