Page 21 - SCI Catalog 2018
P. 21

  4000 SERIES SPECIFICATIONS
INDEX
  INPUT
  Voltage
 4320
  115/230 VAC ± 15%, user selection
 4520
   115/230V Auto Range, ± 15% variation
    Frequency
  50/60 Hz ± 5%
 Fuse
  4320
  6.3 A 250 V slow blow
 4520
   15 A slow blow 250 VAC
    INSULATION RESISTANCE TEST MODE
          Output Voltage
Range: Resolution: Accuracy:
100 - 1000 VDC
1V
± (2% of reading + 5 V)
       Voltage Display
Range: Resolution: Accuracy:
0 - 1000 V
1V
± (2% of reading + 2 V)
       Resistance Display
Range:
1 - 1000 MΩ (4 digit, auto ranging)
   DIELECTRIC WITHSTAND TEST MODE
   Output Rating 4320 4520
     5 kV @ 20 mAAC 6 kV @ 5 mADC
   5 kV @ 100 mAAC 6 kV @ 10 mADC
   Voltage Setting/ Range:
Display
Resolution: Accuracy:
   0 - 5.00 kVAC
0 - 6.00 kVDC
0.01 kV
± (2% of setting + 5 V) ± (2% of reading + 10 V)
 Current Display 4320 4520
      Range: 0 - 20.00 mAAC, 0 - 5.00 mADC Resolution: 0.01 mA
Accuracy: ± (2% of reading + 0.02 mA)
   Range: 0 - 99.99 mAAC, 0 - 10.00 mADC Resolution: 0.01 mA
Accuracy: ± (2% of reading + 0.06 mA)
 HI-Limit 4320 AC LO-Limit
4320 DC 4520 AC 4520 DC
      Range: 0 - 20.00 mA
Resolution: 0.01 mA
Accuracy: ± (2% of setting + 0.02 mA)
   Range: 0 - 5.00 mA
Resolution: 0.01 mA
Accuracy: ± (2% of setting + 0.02 mA)
   Range: 0 - 99.99 mAAC
Resolution: 0.01 mA
Accuracy: ± (2% of reading + 0.06 mA)
   Range: 0 - 10.00 mADC
Resolution: 0.01 mA
Accuracy: ± (2% of reading + 0.06 mA)
    Failure Detector Audible and Visual
   DC Output Ripple 4320 4520
    < 5% Ripple RMS at 6 kVDC @ 5 mA, resistive load
   ≤ 5% Ripple RMS at 6 KVDC @ 10 mA, resistive load
     Discharge Time ≤ 200 ms
    Max. Capacitive 1.00 uF < 1 kV 0.08 uF < 4 kV
Load in DC Mode
0.75uF <2kV 0.04uF <5kV 0.50uF <3kV 0.01uF <6kV
    AC Wave Form Sine Wave distortion <2%, Crest Factor = 1.3 - 1.5
    AC Output Frequency Range:
    50/60 Hz, user selection
   Output Regulation ± (1% of setting + 5 V) from no load to full load
    Dwell Timer Range: Resolution:
Accuracy:
 0, 0.2 - 999.9 sec, (0 = continuous) 0.1 sec increments
± (0.1% + 0.05 sec)
    Ramp Timer Range: Resolution:
Accuracy:
    0.1 - 999.9 sec
0.1 sec increments ± (0.1% + 0.05 sec)
          Resolution:
500 VDC
1000 VDC
       MΩ
MΩ
MΩ
       0.01
1.00 - 40.00
1.00 - 80.00
       0.1
35.0 - 999.9
75.0 - 999.9
         Hi-Limit
Range:
0, 1 - 1000 MΩ (0 = off)
       LO-Limit
Range:
1 - 1000 MΩ
       Delay Timer
Range: Resolution: Accuracy:
0, 0.5 - 999.9 sec, (0 = continuous) 0.1 sec
± (0.1% of 0.05 sec)
        GROUND BOND TEST MODE
        Output Voltage
Range:
6 VAC fixed
       Output Frequency
Range:
50/60 Hz, user selectable
       Output Current
Range: Resolution: Accuracy:
   Specifications subject to change without notice.
3.0 - 30.0 AAC
0.1 A
± (2% of setting + 0.02 A)
       Current Display
Range: Resolution: Accuracy:
0 - 30.0 A
0.1 A
± (3% of reading + 0.01 A)
       HI-Limit LO-Limit
Range:
0 - 510 mΩ for 3.0 - 10.0 A
    0 - 200 mΩ for 10.1 - 25.0 A
    0 - 150 mΩ for 25.1 - 30.0 A
     Resolution:
1 mΩ
     Accuracy:
± (2% of setting + 2 mΩ)
       Dwell Timer
Range: Resolution: Accuracy:
0, 0.5 - 999.9 sec, (0 = continuous) 0.1 sec
± (0.1% + 0.05 sec)
       Milliohm Offset
Max. Offset Capability: Resolution: Accuracy:
0 - 100 mΩ
1 mΩ
± (2% of setting + 2 mΩ)
       GENERAL SPECIFICATIONS
     Memories
 Remote I/O
Allows storage of up to 6 different test programs and 6 steps per memory and a single step mode
      Input: Output:
Test, Reset, Interlock & recall memory 1-6 Pass, Fail, Test-In-Process
      Interface
Optional RS-232
     Security
Lockout capability to avoid unauthorized access to test set-up programs
     Calibration
Software & adjustments made through front panel
     Mechanical
Bench or rack mount with tilt up front feet (4520 Only)
       Dimensions
(W x H x D)
4320
11" x 3.5" x 17" (280 x 89 x 430 mm)
     4520
16.9" x 5.2" x 15.7" (430 x 133 x 400 mm)
       Weight
4320
33 lbs. (15 kg)
     4520
54 lbs. (24.5 kg)
    21
 Toll Free +1-800-504-0055 PPhhoonnee++11--884477-9-93322-3-366622
   
   19   20   21   22   23